Home About News New Customer My Account My Cart All products Download Support
Products Get Started
Demos Contact Us
Shop
Browse products
All products
My account
My quotes
My cart
Login
Currency:
Events
Click here for upcoming events ..


MoveOn v2.0 (obsolete)

Detects movement upto 10 m away. Be there not or be I-CubeX-ed. Need lots of detail ? Try the MoveAround.

Application examples

  1. Use for detection of motion in rooms (doesn't detect presence of objects or humans, because only movement is detected). Use two or more to determine the direction of a movement.
  2. Combine with a TapTiled floor, some MoveOn and/or ReachClose sensors and make sure every move of your visitor has an effect. The Flash + SeeLaser combo allows you to implement break-beams that could indicate borders or thresholds.

Technical specifications

Product MoveOn sensor
Version 2.0 (April 2016)
Sensing parameter displacement
Sensing method microwave radar circuit
Active volume 80 ° azimuth (ie. moving left-right) angle, 40 ° pitch (ie. moving up-down) angle
Range 0.3 to 10 m (1 to 32 ft) within active volume
Resolution 1 bit (motion detected or no motion detected)
Output pulse width 2, 3, 10 or 30 s (upon motion detection sensor outputs high value during this time; selectable with jumper)
Calibration
Motion Voltage (use 5 V power supply) 7-bit MIDI value (use 'no processing' editor preset)
no 0.00 0
yes 5 127
Power supply 4.75 to 5.25 V DC, 2 mA
Operating conditions -30 to 70 °C (-22 to 158 °F)
Sensor dimensions 45 x 37 x 18 mm (1.8 x 1.5 x 0.71 inch)
Weight 30 g (0.71 oz), incl. cable
Cable 1.0 m (39 inch), shielded, red wire = power, uninsulated wire = ground, black wire = sensor output, maximum extension 30 m (98 ft)
Connector male plug with 3 pins in a row spaced 2.54 mm (0.100 inch)
Software support

  1. Our EditorX software allows you to configure the digitizer to process and map the sensor data of multiple sensors simultaneously.
  2. Our Link software allows you to receive the sensor data from the digitizer and use your computer to view, calibrate, record, process and map the sensor data of multiple sensors simultaneously.
  3. Our SensorX software allows you to receive the sensor data from the digitizer and use your computer to view, calibrate, record, process and map the data of a single sensor.

Application notes
  1. Make sure the sensor is plugged into the Digitizer with the red wire connected to power. Reversing the plug may cause damage to the sensor.
  2. Best results are obtained if the sensor is placed up high, about 2 to 3 meter (7 to 10 feet) in the area it is being used in.

This page was updated on Tuesday 11 July 2017.
Comments by customers Write Review
There are currently no comments on this product.
Product Search




Advanced Search
Comments more
Write ReviewWrite a comment on this product!
Support
New Customers

Need help?

Resources

Downloads

User forums

Linkedin group LinkedIn group

Facebook page Facebook page