|
Release yourself from the powers that be. Go out in the bush, up in the air, but take your I-CubeX with you. Can be used with any of our digitizers. Whopping 2000 mAh capacity. Includes charger.
Application examples
- Great for making the Wi-microDig independent of power outlets for a substantial amount of time.
- Also good for situations where your Digitizer or microDig feels powerless.
- Pretty handy for powering any other gear.
Technical specifications
Product |
BatteryPack-2000 |
Version |
3.1 (2007) |
Description |
rechargeable power supply |
Battery type |
Li-ion |
Battery capacity |
2000 mAh, at least 500 times chargeable in less than 2 hrs, if used with a Wi-microDig and one Turn sensor the battery will last about 6 hrs |
Battery output |
7.2 (max 8.4) V DC, max 5 A |
Battery connector |
plugs available for all our digitizers, 5 ft cable length |
Battery dimensions |
20 x 41 x 71 mm (0.80 x 1.6 x 2.8 inch) |
Battery weight |
110 g (3.8 Oz) |
Charger input voltage |
100-240 V AC (50-60 Hz) |
Charger output |
8.4 V DC, 1000 mA |
Charger connector |
US type power plug |
Charger dimensions |
40 x 15 x 92 mm (1.6 x 0.59 x 3.6 inch) |
Application notes |
The charger turns off automatically when the battery is fully charged.
Plug the battery connector (2 pins) to the charger's connector (2 holes).
Connect the charger's AC power cable to a power outlet (100-240V worldwide support).
The red LED will now be on, indicating that the battery is charging.
When the battery is full the green LED will turn on.
Disconnect the battery from the charger.
Connect the correct plug to use the battery with a digitizer, and make sure that the plug is center positive.
|
|