Home About News New Customer My Account My Cart All products Download Support
Products Get Started
Demos Contact Us
Shop
Browse products
All products
My account
My quotes
My cart
Login
Currency:
Events
Click here for upcoming events ..


TouchMicro-03 v1.0 (obsolete)

A tiny, round touch sensor, great for making a multipoint touch surface. Contact pressure provides continuous control. Responds to pressure from approx. 40 KPa (0.4 Kg/cm2, 6 PSI) to 5.5 MPa (57 Kg/cm2, 804 PSI) or a force of approx. 0.3 N (30 g, 0.07 lb) to 39 N (4.0 Kg, 8.8 lb) that's evenly applied across its active area, a 3.0 mm (0.12 inch) diameter disk. View, calibrate, record and map the sensor data using our TouchSensors software (see below).

And look, it's part of a family. Here are all the versions we have available (note that some of these sensors have a different response curve):

Application examples

  1. Can be easily worn or applied to a variety of surfaces. Blow Laurie Anderson, Marillion and others away. Trigger those samples!
  2. Use as touch sensor for a sound synthesizer.
  3. May be used to design your own fretless bass. Use for capturing slaps while the Slide-500 functions as your pitch controller. A GForce3D will help you accentuate your tones when you move the stem upright.
  4. Can be used in your custom wind instrument design. Use for buttons, while using a Slide-100 for octave control and a GForce3D to capture body movements.
  5. Create a fancy control panel by combining Push sensors (Push, Push2D), Reach sensors (Reach, ReachClose), Slide sensors (eg. Slide-50, Slide-200, Slide-500, SlideRound, SlideWide), Touch sensors (see above) and Turn sensors to name a few.

Technical specifications

Product TouchMicro-03 sensor
Version 1.0 (2007)
Sensing parameter contact pressure or force
Sensing technology force sensitive resistor
Active area 3 mm (0.12 inch) diameter disk
Range approx. 40 KPa (0.4 Kg/cm2, 6 PSI) to 5.5 MPa (57 Kg/cm2, 804 PSI) or
approx. 0.3 N (30 g, 0.07 lb) to 39 N (4.0 Kg, 8.8 lb), evenly applied across active area
Output resistance more than 500 KOhm (at 0 N) to 500 Ohm (at 39 N) in parallel with 47 KOhm
Calibration (force applied evenly across active area)
N g Oz Voltage (use 5 V power supply) 7-bit MIDI value (use 'no processing' editor preset)
0 0 0 0.00 0
0.29 30 1.1 2.95 75
0.88 90 3.2 3.58 91
1.1 110 3.3 4.05 103
1.9 190 6.7 4.33 110
3.9 400 14 4.52 115
Calibration (force applied per unit of active area)
KPa PSI Voltage (use 5 V power supply) 7-bit MIDI value (use 'no processing' editor preset)
0 0 0.00 0
41 5.9 2.95 75
124 18 3.58 91
156 23 4.05 103
269 39 4.33 110
551 80 4.52 115
Power supply 1.0 to 10 V DC, 0.1 mA at 5 V
Operating conditions 10 to 40 °C (50 to 104 °F), 85% RH (non-condensing)
Sensor dimensions 51 mm (2.0 inch) x 7.5 mm (0.30 inch) x 1.5 mm (0.059 inch)
Weight 15 g (0.5 oz), incl. cable
Cable 1.0 m (39 inch), shielded, red wire = power, black wire = ground, white wire = sensor output, maximum extension 30 m (98 ft)
Connector male plug with 3 pins in a row spaced 2.54 mm (0.100 inch)
Software support

  1. 09 Dec 2014: SensorX v1.00 for MacOS and Windows (64bit, contact us for the 32bit version) from source code in Max. For multiple sensors or sensor outputs, run multiple instances of the application, each started in its own folder. Use together with Connect (MacOS / Windows) or BlueMIDI (Windows).
  2. 08 Dec 2010: TouchSensors v1.11 for MacOS and Windows from source code in Max.

Application notes
  1. Please note that calibration of the sensor requires careful attention to detail since they behave differently near the extremes of the usable range. The sensor behaves as a force sensor within the specified range but may not behave like a force sensor beyond this range. It is merely documented as a saturation effect above the range, meaning that sensitivity changes with force, and as a threshold effect below the range, which behaviour may be hard to repeat or even random.
  2. To obtain reliable results, the force has to be applied evenly across the active surface area of the sensor. Using a finger to calibrate or to measure how much force you exert is very unreliable unless you at least use a flat rigid object between the finger and the sensor.
  3. If the sensor shows a non-zero value when no force is applied, flatten the sensor between two flat objects for a few days. Any bending of the sensor may result in a non-zero at-rest value. Store sensor in flat position for best results.
  4. Using adhesive to attach the sensor may result in a non-zero value when no force is applied

This page was updated on Tuesday 14 June 2016.
Comments by customers Write Review
There are currently no comments on this product.
Customers who bought this product also purchased
Wi-USB-BatteryCable v1.0 (obsolete)
Wi-USB-BatteryCable v1.0 (obsolete)
TouchMicro-10 v2.1
TouchMicro-10 v2.1
TouchMiniOn v1.2 (obsolete)
TouchMiniOn v1.2 (obsolete)
ExtendCable-01 v1.1
ExtendCable-01 v1.1
USB-microBattery v1.1 (obsolete)
USB-microBattery v1.1 (obsolete)
Slide-0500 v1.1
Slide-0500 v1.1
Product Search




Advanced Search
Comments more
Write ReviewWrite a comment on this product!
Support
New Customers

Need help?

Resources

Downloads

User forums

Linkedin group LinkedIn group

Facebook page Facebook page