|
A low power control signal switcher. Handles at most 10 Watt loads.
Application examples
- Advance your slide projector with each MIDI signal.
- Switching of lamps, small motors and other analog signals such as audio signals.
Technical specifications
Product |
Switch actuator |
Version |
1.3 (March 2010) |
Actuator type |
reed relay |
Switching power |
10 W maximum |
Switching voltage |
200 V DC maximum |
Switching current |
0.5 A maximum |
Switched output connector |
screw-terminal block |
Control power |
5 V DC, 9 mA |
Actuator dimensions |
34 x 13 x 13 mm (1.3 x 0.51 x 0.51 inch) |
Weight |
20 g (0.7 oz), incl. cable |
Cable |
1.0 m (39 inch), shielded, red wire = power, black wire = ground, white wire = n/c |
Control connector |
male plug with 3 pins in a row spaced 2.54 mm (0.100 inch) |
Application notes |
- Can be used directly with the Digitizer but needs additional circuitry when used with USB-microDig AUX outputs.
- If its contacts remain closed even though the control power is off, try setting the control power on and off rapidly after each other. Eventually it should allow normal opening and closing the contacts.
|
|