Home About News New Customer My Account My Cart All products Download Support
Products Get Started
Demos Contact Us
Shop
Browse products
All products
My account
My quotes
My cart
Login
Currency:
Events
Click here for upcoming events ..


Checkout
SeeIR v1.3 $18.64US
 
2 - 6 : $17.71US ( save 5% )
7 - 19 : $16.77US ( save 10% )
20 + : $14.91US ( save 20% )
excl. sales tax

An infra-red LED to invisibly trigger infra-red sensitive devices. Or just use it as another way to light up your christmas tree .... not (use a smartphone camera to see it).

Application examples

  1. Use together with Flash sensor to make an invisible beam that triggers an event when interrupted.
  2. Does not work with remote control receivers of stereo equipment, VCR, TV etc..

Technical specifications

Product SeeIR actuator
Version 1.3 (July 2017)
Actuator type infra-red LED indicator
Power supply 5 V DC, 11 mA
Dimensions 15 x 11 x 11 mm (0.59 x 0.43 x 0.43 inch)
Mounting no mounting holes
Cable 0.90 m (35 inch), twisted, unshielded, red wire = power, black wire = ground, white wire = n/c, extendable at least 100 m (328 ft) with ExtendCableD-10
Connector male 1x4 plug with 3 pins in a row spaced 2.54 mm (0.100 inch)
Weight 15 g (0.5 oz), incl. cable
Software support
  1. Our EditorX software allows you to configure the digitizer to control multiple actuators simultaneously with on/off as well as PWM signals.
  2. Our Link software allows you to multiple actuators simultaneously with on/off signals.
Application notes
  1. To see the infra-red light emitted by the SeeIR that is invisible to the naked eye, look through a smartphone camera at the seeIR.
  2. Can be controlled with an actuator output using on (5V) / off (0V) signals, as well as pulse width modulated (PWM) signals. Note that since actuator outputs provide less current than the 5V power supply, the LED will not be a bright as when connected with the 5V power supply.
  3. Can be turned on and off directly with a Digitizer output (ie. the power supply pins of inputs 25 - 32).
  4. To turn it on and off with a USB-microDig AUX output, take the pin that's connected to the red wire in the connector out of the slot by slightly depressing the metal lever through the corresponding plastic cutout, then push the lever out again a bit and finally push the pin in the AUX slot such that the lever clicks into place and the pin can't be pushed out. You can see these steps on page 4 and 5 of the HackPlugs v1.0 manual.
  5. To turn it on and off with a Wi-microDig, it must run firmware v6.3. Move the pin of the plug that is connected to the red wire to the position of the pin connected to the white wire, which wire is not connected to anything and can be removed. Use a pointy object, eg. a tiny screw driver or sharp knife to take the pin out of the slot by slightly depressing the metal lever through the cutout for the pin attached to the white wire. Then, after having taken out the pin, push the lever out again a bit so that after placing the pin in the slot between the red and black wires, the lever blocks the pin from coming out of the slot. You can see these steps on page 4 and 5 of the HackPlugs v1.0 manual.

This page was updated on Thursday 02 September 2021.
Comments by customers Write Review
There are currently no comments on this product.
Customers who bought this product also purchased
Angle v1.0
Angle v1.0
EncloseMini v1.0
EncloseMini v1.0
PiShield v1.0
PiShield v1.0
SeeWhite-3W v1.0
SeeWhite-3W v1.0
EncloseDig v1.0
EncloseDig v1.0
Drive-FR120N v1.0
Drive-FR120N v1.0
Product Search




Advanced Search
Comments more
Write ReviewWrite a comment on this product!
Support
New Customers

Need help?

Resources

Downloads

User forums

Linkedin group LinkedIn group

Facebook page Facebook page