Application examples

1. Use as trigger beam together with Flash sensor. Laserharp anyone ? See this videoclip for a demo of the SeeLaser-Red applied together with the Flash sensor ! Create a virtual cage for dancers. Or detect intruder, visitor, dog, cat, mouse .... movements.
2. Make every move count and add a TapTiled floor, some MoveOn and/or ReachClose sensors. You might need to rethink your choreography.

Technical specifications

Product					SeeLaser-Green actuator
Version					1.1 (March 2018)
Actuator type					laser LED
Light wavelength					532 nm (green light)
Range					at least 20 m
Beam					18 mm (max) at 6 m distance and 25 ℃
Beam radiating angle					2.4 mrad
Output power					5 mW (safety class IIIa)
Power supply					2.5 - 5 V DC, 230 mA
Operating temperature					0 to 40 °C (32 to 104 °F)
Dimensions					12.5 mm (0.49 inch) diameter x 66 mm (2.6 inch) long
Mounting					mount in 12.5 mm (0.49 inch) hole
Cable					1.0 m (39 inch), shielded, red wire = power, black wire = ground, white wire = n/c, extendable at least 50 m (164 ft) with ExtendCableD-10
Connector					male 1x4 plug with 3 pins in a row spaced 2.54 mm (0.100 inch)
Weight					27 g (0.95 oz), incl. cable
Software support					Our EditorX software allows you to configure the digitizer to control multiple actuators simultaneously with on/off as well as PWM signals. Our Link software allows you to multiple actuators simultaneously with on/off signals.
Application notes					Can be powered directly by the 5V power of any digitizer but given the SeeLaser-Green's high current consumption, use only one per USB-microdig or Wi-microDig ! A Digitizer can supply power for 3 SeeLaser-Green. If you need to power more lasers than the digitizer can provide power for, connect them to a separate 5V power supply via USB-PowerCables. If you want to control it with one of the USB-microDig or WiDig actuator outputs (top row of the connector for sensors and actuators), it needs to be connected via a Switch, SwitchPower, Drive-FR120N or similar device that can be controlled with an actuator output. To connect the power pin of the actuator plug to the screw terminal of the Switch (or similar device) and the ground pin of the actuator plug to the ground of the separate power supply use eg. the wires and a 1x4 housing of an AdaptCableKit. The female receptacle end of the AdaptCableKit wires is compatible with the actuator plug pins. Use the 1x4 housing of the AdaptCableKit to create a female plug with receptacles in the positions of the ground and power pins of the actuator plug. Connect the male end of the ground wire of the actuator plug to the ground of the separate power supply, eg. using a separate single screw terminal. Insert and fasten the male end of the power wire of the actuator plug in the screw terminal of the Switch. Connect the other screw terminal of the Switch to the positive voltage of the separate power supply. The size and intensity of the green dot can be changed by adjusting the focus, which can be set by rotating the lens at the front using a screwdriver. Caution ! Never point the beam at the eye, stare into the beam nor look at the beam through a microscope or other lenses. Inform yourself about laser safety.