Application examples

1. Create a fancy control panel by combining Push sensors (Push, Push2D), Reach sensors (Reach, ReachClose), Slide sensors (eg. Slide-50, Slide-200, Slide-500, SlideRound, SlideWide), Touch sensors (Touch, TouchMicro-05, TouchMicro-10, TouchMini, TouchMiniOn, TouchStrip) and Turn sensors to name a few.

Technical specifications

Product		Push-100 sensor
Version		1.1 (2005)
Sensing parameter		contact position
Sensing method		linear resistive potentiometer
Range		100 mm (3.94 inch)
Output resistance		0 Ohm (at 0 mm and 100 mm) to 5 KOhm (at 50 mm)
Calibration
mm	inch	Voltage (use 5 V power supply)	7-bit MIDI value (use 'no processing' editor preset)
0.00	0	0.00	0
100	3.94	5.00	127
Power supply		1.0 to 10 V DC, 0.5 mA at 5 V
Sensor dimensions		140 x 30 x 14 mm (5.4 x 1.2 x 0.55 inch), incl. two 3.0 mm (0.12 inch) mounting holes spaced 12 cm (4.7 inch) apart and a 14.2 x 8.0 x 1.2 mm (0.559 x 0.31 x 0.047 inch) shaft
Knob dimensions		24 x 11 x 11 mm (0.98 x 0.43 x 0.43 inch)
Weight		35 g (1.2 oz), incl. cable
Cable		1.0 m (39 inch), shielded, red wire = power, black wire = ground, white wire = sensor output, maximum extension 30 m (98 ft)
Connector		male plug with 3 pins in a row spaced 2.54 mm (0.100 inch)
Software support		Our EditorX software allows you to configure the digitizer to process and map the sensor data of multiple sensors simultaneously. Our Link software allows you to receive the sensor data from the digitizer and use your computer to view, calibrate, record, process and map the sensor data of multiple sensors simultaneously. Our SensorX software allows you to receive the sensor data from the digitizer and use your computer to view, calibrate, record, process and map the data of a single sensor.