1. Use as a mini joystick to tweak parameters.
2. Attach elastics, wires or ropes to it that are themselves attached to other objects to detect their movement.

Technical specifications

Product		Push2DMini sensor
Version		1.0 (September 2016)
Sensing parameter		contact position
Sensing method		linear resistive potentiometer
Range		± 2 mm (± 0.1 inch), spring-loaded
Output resistance		0 Ohm (at -5 mm) to 5 KOhm (at +5 mm)
Power supply		1.0 to 10 V DC, 1 mA at 5 V
Dimensions		26 x 27 x 18 mm (1.0 x 1.1 x 0.71 inch)
Mounting		four 2.5 mm (0.10 inch) mounting holes spaced apart 20 mm (0.79 inch) width-wise and length-wise
Cable		1.0 m (39 inch), shielded, red wire = power, black wire = ground, white and grey wires = sensor output, extendable at least 100 m (328 ft) with ExtendCableD-10 and 30 m (98 ft) with ExtendCable2D-01
Connector		male 1x4 plug with 4 pins in a two rows spaced 2.54 mm (0.100 inch)
Weight		15 g (0.53 oz), incl. cable
Software support		Our SensePlay software is a very easy way to quickly map sensor data to (sequences of) sounds, images and videos using a drag & drop user interface. Our EditorX software allows you to configure the digitizer to process and map the sensor data of multiple sensors simultaneously. Our Link software allows you to receive the sensor data from the digitizer and use your computer to view, calibrate, record, process and map the sensor data of multiple sensors simultaneously. Our SensorX software allows you to receive the sensor data from the digitizer and use your computer to view, calibrate, record, process and map the data of a single sensor.