Application examples

Technical specifications

Product					FeelVibe actuator
Version					2.1 (March 2023)
Actuator type					Eccentric Rotating Mass (ERM) motor with haptic driver
Power supply					4.75 to 5.25 V DC, 3.5 mA (average) at 5 V
Operating temperature					-40 to 85 ºC (-40 to 185 ºF)
Dimensions					19 x 19 x 7 mm (0.75 x 0.75 x 0.28 inch)
Mounting					two 2.2 mm (0.087 inch) mounting holes spaced apart 13.5 mm (0.53 inch)
Cable					1.0 m (39 inch), shielded, red wire = power, black wire = ground, grey wire = I2C data (SDA), white wire = I2C clock (SCL), extendable at least 4 m (13 ft) with ExtendCableD-01 and 10 m (33 ft) with ExtendCableD-10
Connector					male 1x4 plug with 4 pins in a row spaced 2.54 mm (0.100 inch)
Weight					13 g (0.46 oz), incl. cable
Software support					Our EditorX software allows you to configure the digitizer to control multiple actuators simultaneously. We will soon release dedicated software for using this actuator. Ask us about it !
Application notes					Make sure the actuator is plugged into the digitizer with the red wire connected to power. Reversing the plug or applying power with reverse polarity may cause damage to the actuator. Requires a digitizer with digital (I2C) ports, eg. the WiDig, USB-microDig or the Wi-microDig. The default I2C address is 90 (0x5A). Both I2C lines have 10 kOhm pull-up resistors. Our software enables you to use most features. For more technical specs, and to find out how to control the actuator in detail, please consult this datasheet.