Home About News New Customer My Account My Cart All products Download Support
Products Get Started
Demos Contact Us
Shop
Browse products
All products
My account
My quotes
My cart
Login
Currency:
Events
Click here for upcoming events ..


Checkout
FeelVibe v1.0 $20.00US $18.00US
excl. sales tax

A vibrating actuator which provides haptic and tactile feedback in a variety of ways.

Application examples

  1. Make it jiggle, wiggle, twitch, shimmy, joggle, wag, wobble, shake, twist, squirm, writhe .. !
  2. Give vibro-tactile feedback to objects if a visitor touches them (detect the touch with Touch sensor).

Technical specifications

Product FeelVibe actuator
Version 1.0 (September 2016)
Actuator type Eccentric Rotating Mass (ERM) motor
Power supply 4.75 to 5.25 V DC, ? mA (average) at 5 V
Actuator dimensions 30 x 22 x 10 mm (1.2 x 0.87 x 0.39 inch)
Weight 14 g (0.49 oz), incl. cable
Cable 1.0 m (39 inch), shielded, red wire = power, black wire = ground, white wire = actuator control, maximum extension ? m (? ft)
Connector male plug with 4 pins in a rows spaced 2.54 mm (0.100 inch)
Software support
  1. Our EditorX software allows you to configure the digitizer to control multiple actuators simultaneously with on/off as well as PWM signals.
  2. Our Link software allows you to multiple actuators simultaneously with on/off signals.
Application notes
  1. Make sure the actuator is plugged into the digitizer with the red wire connected to power. Reversing the plug may cause damage to the sensor.
  2. Can be used directly with the USB-microDig actuator outputs (top row of the connector for sensors and actuators), as well as with a Wi-microDig with firmware v6.3 or higher. Can also be used with the Digitizer outputs (ie. the power supply pins of inputs 25 - 32) but the white wire needs to be connected to the same pin as the red wire.
  3. To use with a Wi-microDig with firmware v6.3 or higher move the pin of the plug that is connected to the white wire to the free position between the ground and power pins (ie. the pins connected to the black and red wires). Use a pointy object, eg. a tiny screw driver or sharp knife to take the pin out of the slot by slightly depressing the metal lever through the cutout for the pin attached to the white wire. Then, after having taken out the pin, push the lever out again a bit so that after placing the pin in the slot between the red and black wires, the lever blocks the pin from coming out of the slot. You can see these steps on page 4 and 5 of the HackPlugs v1.0 manual.
  4. Can be controlled with on (5V) / off (0V) signals, as well as pulse width modulated (PWM) signals.

This page was updated on Tuesday 12 July 2022.
Comments by customers Write Review
There are currently no comments on this product.
Customers who bought this product also purchased
WiSystem
WiSystem
ReachCloseD v1.0
ReachCloseD v1.0
BatteryPack-1800 v1.0 (obsolete)
BatteryPack-1800 v1.0 (obsolete)
Light v2.1
Light v2.1
Vibe v2.1
Vibe v2.1
BioVolt v2.3
BioVolt v2.3
Product Search




Advanced Search
Comments more
Write ReviewWrite a comment on this product!
Support
New Customers

Need help?

Resources

Downloads

User forums

Linkedin group LinkedIn group

Facebook page Facebook page