The Volt is that handy little sensor you always want to have available in your toolbox ! It amplifies an AC voltage of at most 1Vpp at its input and outputs it with a DC offset of about 2.5V within the 0 - 5V range of any I-CubeX digitizer input.
Use the Volt to capture any audio line out signal.
You may need to adjust the gain using the metal potentiometer on the back of the Volt.
- Our SensePlay software is a very easy way to quickly map sensor data to (sequences of) sounds, images and videos using a drag & drop user interface.
- Our EditorX software allows you to configure the digitizer to process and map the sensor data of multiple sensors simultaneously.
- Our Link software allows you to receive the sensor data from the digitizer and use your computer to view, calibrate, record, process and map the sensor data of multiple sensors simultaneously.
- Our SensorX software allows you to receive the sensor data from the digitizer and use your computer to view, calibrate, record, process and map the data of a single sensor.
||1.0 (May 2019)|
||bipolar voltage measurement|
||200 mV to 1 V AC peak-to-peak (dependent on gain)|
||25 to 125|
||2.4 to 5.5 V DC, ? mA max|
||21 x 15 x 10 mm (0.83 x 0.59 x 0.39 inch)|
||15 g (0.53 oz) incl. cable|
||1.0 m (39 inch) shielded, red wire = power, black wire = ground, white wire = signal, maximum extension 30 m (98 ft)|
||male plug with a row of 3 pins spaced 2.54 mm (0.100 inch)|