Home About News New Customer My Account My Cart All products Download Support
Products Get Started
Demos Contact Us
Browse products
All products
My account
My quotes
My cart
Click here for upcoming events ..

AngleD v1.2 $29.01US
2 - 6 : $27.56US ( save 5% )
7 - 19 : $26.10US ( save 10% )
20 + : $23.21US ( save 20% )
excl. sales tax

What's your angle ? Capture the rotational angle of an object relative to this sensor. Comes with one those super strong neodymium magnets. A digital I2C sensor, that outputs high resolution, low-noise signals. See the Angle sensor for an analog, mechanically coupled version.

Requires a WiDig running firmware v8.11 or higher, or USB-microDig running firmware v7.61 or higher.

Application information

Product AngleD sensor
  • Measure the rotational angle of an object (with a magnet attached) relative to the sensor.
  1. Make sure the sensor is plugged into the digitizer with the red wire connected to power. Reversing the plug may cause damage to the sensor.
  2. Requires a digitizer with digital (I2C) ports, eg. the USB-microDig or the Wi-microDig.
  3. The default I2C address is 54 (0x36). Both I2C lines have 4.7 kOhm pull-up resistors.
  4. Our software enables you to use most features of this sensor. In EditorX, use the method parameter to set the sensor to output (any method #) the angle.
  5. The included magnet needs to be placed perpendicularly, in a plane parallel to the sensor (above or below), with the center of the ring in the center of the sensor. Now when you rotate the sensor, the value should go from 0 to 4095.
  6. See the AngleD function description in the firmware documentation for more details about the various methods available in host and standalone mode.
  7. For more technical specs, and to find out how to access the sensor data in detail, please consult this datasheet.
  8. Any magnetic materials or fields in the vicinity of the sensor may distort the sensor output.
  9. To extend the cable, use ExtendCableD-01 and/or ExtendCableD-10.
  • Our EditorX software allows you to configure the digitizer to process and map the sensor data of multiple sensors simultaneously.

Technical specifications

Product AngleD sensor
Version 1.1 (August 2019)
Sensing parameter magnetic field strength
Sensing method Hall effect sensor
Range ±? to ±? Gauss (1 Gauss in air = 1 Oersted)
Resolution ? mGauss
Non-linearity ? % minimum
Hysteresis ? % minimum
Bandwidth ? Hz
Power supply 3.3 to 5 V DC, ? mA at 5 V DC
Operating temperature -? to ? °C (-? to ? °F)
Sensor dimensions x x ( x x inch)
Weight g ( oz), incl. cable
Cable 1.0 m (39 inch), shielded, red wire = power, black wire = ground, grey wire = I2C data (SDA), white wire = I2C clock (SCL), extension tested upto 5 m (16 ft) with ExtendCableD-01 and upto 20 m (66 ft) with ExtendCableD-10
Connector male 1x4 plug with 4 pins in one row spaced 2.54 mm (0.100 inch)
Included magnet Neodymium magnet 10,800 Gauss, 6.4 mm (0.25 inch) diameter x 1.6 mm (0.063 inch) thick

This page was updated on Friday 18 September 2020.
Comments by customers Write Review
There are currently no comments on this product.
Customers who bought this product also purchased
USB-CableExtender v1.1
USB-CableExtender v1.1
Flash v1.4
Flash v1.4
SeeLaser-Red v4.1
SeeLaser-Red v4.1
Bang v1.3
Bang v1.3
MoveThruOn v2.1
MoveThruOn v2.1
MoveOn v1.8
MoveOn v1.8
Product Search

Advanced Search
Comments more
Write ReviewWrite a comment on this product!
New Customers

Need help?



User forums

Linkedin group LinkedIn group

Facebook page Facebook page
Instant SSL