Home About News New Customer My Account My Cart All products Download Support
Products Get Started
Demos Contact Us
Shop
Browse products
All products
My account
My quotes
My cart
Login
Currency:
Events
Click here for upcoming events ..


MoveOn v1.4 (obsolete)

Detects movement of humans and warm-blooded animals. Be there not or be I-CubeX-ed. Outputs a high value if no movement is detected within its field of view. If any movement is detected it outputs pulses that can be smoothed so as to get a signal that roughly corresponds with activity in the room.

Application examples

  • Use for detection of motion of animals or humans in rooms (doesn't detect just presence, because only movement of heat-emitting objects is detected). Use two or more to determine the direction of a movement.

Other human, animal and object sensors

We offer a number of sensors to detect motion and/or presence and/or proximity of humans, animals and objects in a space:

  • For a motion sensor with variety of sensitivity and output configuration options, view the MoveOn v1.8.
  • If you need a motion sensor of which the output changes each time any motion is detected so that it can be smoothed to give a signal that roughly represents the amount of activity, checkout the MoveOn v1.4.
  • A smaller version which output stays high while motion is detected and during a fixed length of time afterwards, try the MoveMiniOn.
  • Want to detect motion through walls ? See the MoveThruOn.
  • Need to detect presence as well as body temperature ? Try the HotSpot2D.
  • The Advance-645 detects the distance of a person in a 50° cone.
  • Need pin-point distance detection ? The ReachFar and its digital, laser-accurate cousin ReachFarD detect distance up to 4 m within a cone of a few degrees. The ReachClose and its digital, laser-accurate cousin ReachCloseD do the same but up to 2 m.
  • Setup perimeters with break-beams made from a SeeLaser-Red or the invisible SeeLaser-IR (or any of our SeeLaser products) and a Flash.
  • Place TapTile sensors on the floor to detect a person stepping or standing on it, and even get a measure of the exerted force.
  • To know exactly who is present, use the ReachID and let each visitor be detected through their RFID tag.

Technical specifications

Product MoveOn sensor
Version 1.4 (July 2012)
Sensing parameter motion of heat emitting object
Sensing method infrared (micrometer spectrum) differential
Active volume 125° ± 25° cone
Range 3 m (10 ft) within active volume
Resolution 1 bit (on or off)
Reset time less than 0.1 s (upon motion detection a low value is output for less than 0.1 seconds)
Calibration
Motion Voltage (use 5 V power supply) 7-bit MIDI value (use 'no processing' editor preset)
no 5.00 127
yes 0.00 0
Power supply 4.75 to 5.25 V DC, 1.6 mA
Sensor dimensions 22 x 29 x 34 mm (mm (0.87 x 1.1 x 1.3 inch)
Weight 20 g (0.71 oz), incl. cable
Cable 1.0 m (39 inch), shielded, red wire = power, uninsulated wire = ground, black wire = sensor output, maximum extension ? m (? ft)
Connector male plug with 3 pins in a row spaced 2.54 mm (0.100 inch)
Software support

  1. Our SensePlay software is a very easy way to quickly map sensor data to (sequences of) sounds, images and videos using a drag & drop user interface.
  2. Our EditorX software allows you to configure the digitizer to process and map the sensor data of multiple sensors simultaneously.
  3. Our Link software allows you to receive the sensor data from the digitizer and use your computer to view, calibrate, record, process and map the sensor data of multiple sensors simultaneously.
  4. Our SensorX software allows you to receive the sensor data from the digitizer and use your computer to view, calibrate, record, process and map the data of a single sensor.

Application notes
  1. Make sure the sensor is plugged into the Digitizer with the red wire connected to power. Reversing the plug may cause damage to the sensor.
  2. The MoveOn sensor needs a few seconds before it is ready for stable operation.
  3. Best results are obtained if the sensor is placed up high, about 2 to 3 meter (7 to 10 feet) in the area it is being used in.
  4. The unit is not suited for environments with rapid temperature changes due to wind, heating devices or air conditioners, nor will the unit work well in environments with shocks and vibrations or environments with sunlight or other intense light aimed directly at the sensor.

This page was updated on Monday 13 June 2022.
Comments by customers Write Review
There are currently no comments on this product.
Customers who bought this product also purchased
Loud v1.3
Loud v1.3
SeeIR v1.2 (obsolete)
SeeIR v1.2 (obsolete)
Flash v1.4
Flash v1.4
ReachOnD v1.2
ReachOnD v1.2
TapMatOn v1.0
TapMatOn v1.0
Advance-645 v1.0 (obsolete)
Advance-645 v1.0 (obsolete)
Product Search




Advanced Search
Comments more
Write ReviewWrite a comment on this product!
Support
New Customers

Need help?

Resources

Downloads

User forums

Linkedin group LinkedIn group

Facebook page Facebook page