I-CubeX Online Store - BendMicro : Flex sensor

BendMicro v2.0	$29.24US

2 - 6 : $27.78US ( save 5% )
7 - 19 : $26.32US ( save 10% )
20 + : $23.39US ( save 20% )
excl. sales tax

Bend your fingers and control your lights. Bi-directional, so it goes from -180° to 180° (larger flex angle possible). Longer versions available as BendMini and BendShort. Need another size, width, length, thickness, stiffness, ... ? Contact us with your request - we can provide you with the solution that best matches your requirements. See this videoclip for a demo of the BendShort !

Application examples

Combine with the TouchGlove and create your own custom dataglove for capturing finger bending, capture hand movements with a GForce3D).
Go whole-body with a bodysuit, capture all your joints' movements and express with all your extremities. A couple of BioVolt sensors will capture muscle tension. Use a GForce3D on your feet and hands to capture kicks and punches. A Hot will keep you in check of your body temp.
Since it's such a thin and flexible sensor, it's usable for measuring airflow.
A wireless WiDig is recommended in all cases to operate without tether.
For bookworms: has also been used to detect turning of pages.

Technical specifications

Product BendMicro sensor

Version 2.0 (May 2011)

Sensing parameter flex angle multiplied by flex radius

Sensing method Flexpoint piezo-resistive technology

Range -180 to +180 ° (larger flex angle possible)

Minimum flex radius 5 mm (0.2 inch)

Output impedance ? kOhm (at -180 ° flex angle) to ? kOhm (at 0 ° flex angle) to ? kOhm (at 180 ° flex angle)

Calibration (using minimum flex radius)

Degrees Voltage (use 5 V power supply) 7-bit MIDI value (use 'no processing' editor preset)

-180

0

180

Power supply 1.0 to 10 V DC, 0.1 mA at 5 V

Dimensions 37 x 7 x 0.1 mm (1.5 x 0.3 x 0.004 inch)

Mounting no mounting holes

Cable 1.0 m (39 inch), shielded, red wire = power, black wire = ground, white wire = sensor output, extendable at least 100 m (328 ft) with ExtendCableD-10

Connector male 1x4 plug with a row of 3 pins spaced 2.54 mm (0.100 inch)

Weight 15 g (0.5 oz), incl. cable

Software support

Our SensePlay software is a very easy way to quickly map sensor data to (sequences of) sounds, images and videos using a drag & drop user interface.

Our EditorX software allows you to configure the digitizer to process and map the sensor data of multiple sensors simultaneously.

Our Link software allows you to receive the sensor data from the digitizer and use your computer to view, calibrate, record, process and map the sensor data of multiple sensors simultaneously.

Our SensorX software allows you to receive the sensor data from the digitizer and use your computer to view, calibrate, record, process and map the data of a single sensor.

Application notes The sensor output is determined by both the angle between the ends of the sensor as well as the flex radius; bending the sensor sharply will result in more value change than bending the sensor smoothly, when keeping the ends in the same position.

This page was updated on Tuesday 31 May 2022.

Comments by customers

There are currently no comments on this product.

Customers who bought this product also purchased

Angle v1.0	EncloseMini v1.0	PiShield v1.0
SeeWhite-3W v1.0	EncloseDig v1.0	Drive-FR120N v1.0