Detects rapid light changes or light flashes.
Check the Light sensor for a wider field of view and larger illuminance detection range.
See this videoclip for a demo of the Flash applied together with the SeeLaser-Red !
- Use for light source intensity measurement, map to a continuous controller and sweep your filters.
- Use with
SeeLaser-Red (red beam), SeeLaser-IR (invisible beam) or
(invisible beam, but for a distance less than 1 m) to create a break-beam that triggers when you cross it.
Laserharp anyone ? Create a virtual cage for dancers.
Or detect intruder, visitor, dog, cat, mouse .... movements.
- Combine with a
sensors and make sure every move of your visitor has an effect.
||1.3.3 (October 2014)|
||visible brightness, illuminance|
|Spectral response range
||400 to 1100 nm (900 nm peak) ie: ultra-violet to infra-red|
|| Lux ( mW/cm2)|
||Voltage (use 5 V power supply)
||7-bit MIDI value (use 'no processing' editor preset)|
||-40° to 100° C (-40° to 212° F)|
||1 to 10 V DC, 20 µA at 5 V|
||13 x 11 x 8 mm (0.51 x 0.43 x 0.3 inch)|
||15 g (0.5 oz), incl. cable|
||1.0 m (39 inch), shielded, red wire = power, black wire = ground, white wire = sensor output, maximum extension 30 m (98 ft)|
||male plug with a row of 3 pins spaced 2.54 mm (0.100 inch)|
- 09 Dec 2014: SensorX v1.00 for MacOS and Windows from source code in Max. For multiple sensors or sensor outputs, run multiple instances of the application, each started in its own folder. Use together with Connect (MacOS) or BlueMIDI (Windows).
||When using the sensor for detection of point light sources and proximity detection, remember that
ambient light needs to be regulated so as not to interfere with the desired operation.|