Hello,
I'm able to connect to the Wi-microDig using the help patch, and read values from all the sensors. I have the externals in my max-externals folder. When I close that and open a bioflex patch, for example, I select the correct com port. The blue light turns on, indicating I'm connected. When I click reset, it says "iCube error(outlet #1): outlet not connected" and "iCube : Switching to Host Mode..." Then when I try to click on/off, I get a stream of messages saying "bpatcher: doesn't understand "float"" . I am using Mac OS X Intel Leopard with MaxMSP 5. From what I understand the icubex patch is already imbedded in these patches, right? Maybe I'm missing the obvious here. Any suggestions?
Cheers
Adrian
Max/MSP biobeat, bioflex, etc. patches issues
Moderator: Tech
-
- Posts: 2
- Joined: Tue Aug 26, 2008 11:50 am
- I-CubeX gear: biowave, bioflex, bioemo, biobeat, wi-micro
Re: Max/MSP biobeat, bioflex, etc. patches issues
OK well I discovered that:
BioFlex-12.maxpat makes a reference to a "bio_norm.pat" file in the inspector of a bpatcher. Does anybody know where to find this file? I downloaded all the MaxMSP stuff from IcubeX but cannot find it...
Similarly the BioBeat-12.maxpat makes a reference to both the bio_norm.pat file and a "bio_thresh.maxpat" file. Also missing.
Can anybody point me to these files? I've searched the web, icubex site, etc...
Thanks!
Adrian
BioFlex-12.maxpat makes a reference to a "bio_norm.pat" file in the inspector of a bpatcher. Does anybody know where to find this file? I downloaded all the MaxMSP stuff from IcubeX but cannot find it...
Similarly the BioBeat-12.maxpat makes a reference to both the bio_norm.pat file and a "bio_thresh.maxpat" file. Also missing.
Can anybody point me to these files? I've searched the web, icubex site, etc...
Thanks!
Adrian