Difference between revisions of "Connect-135 QuickStart Wi-microDig"
Line 5: | Line 5: | ||
− | Verify that your computer has a Bluetooth adapter by checking the Windows control panel or system tray, where a Bluetooth icon should be visible. | + | 1. Verify that your computer has a Bluetooth adapter by checking the Windows control panel or system tray, where a Bluetooth icon should be visible. |
− | + | 2. [[Wi-microDig-601_QuickStart | Add the Wi-microDig as a Bluetooth device to Windows]]. | |
− | Click on "Refresh" in Connect and the Wi-microDig will then appear in the device list. The blue LED on the Wi-microDig will also turn on to indicate that a Bluetooth connection has been made. | + | 3. Click on "Refresh" in Connect and the Wi-microDig will then appear in the device list. The blue LED on the Wi-microDig will also turn on to indicate that a Bluetooth connection has been made. |
By default, Connect will attempt to connect to your Wi-microDig when it is launched. If you would like to disable auto-connect, turn it off by unchecking the auto-enable checkbox in the digitizer view. | By default, Connect will attempt to connect to your Wi-microDig when it is launched. If you would like to disable auto-connect, turn it off by unchecking the auto-enable checkbox in the digitizer view. |
Revision as of 18:43, 12 January 2017
Connect runs in the background and can be accessed via the system tray at the bottom right of the screen. When a Wi-microDig is connected via Bluetooth, Connect creates a virtual MIDI port with the name and serial number of that device.
1. Verify that your computer has a Bluetooth adapter by checking the Windows control panel or system tray, where a Bluetooth icon should be visible.
2. Add the Wi-microDig as a Bluetooth device to Windows.
3. Click on "Refresh" in Connect and the Wi-microDig will then appear in the device list. The blue LED on the Wi-microDig will also turn on to indicate that a Bluetooth connection has been made.
By default, Connect will attempt to connect to your Wi-microDig when it is launched. If you would like to disable auto-connect, turn it off by unchecking the auto-enable checkbox in the digitizer view.
To remove the Wi-microDig from the device list (even when it's not connected and enabled), click on "Remove". If you want to use it again, simply click "Refresh".