Connect-140 QuickStart Wi-microDig

Connect runs in the background and can be accessed via the menu bar at the top of the screen. When a Wi-microDig is connected via Bluetooth Connect creates a virtual MIDI port with the name and serial number of that device.

In the main window, click on the "Add Wi-microDig" button.

In the new window that opens, you should see your Wi-microDig appear in the list. Select it and click on the "Choose" button. If the Wi-microDig doesn't appear after a few seconds, check that it's powered on and that Bluetooth is enabled on your Mac.

If it's the first time connecting to your Wi-microDig, you'll be asked to enter a passcode. Enter the number 1 and click "Pair".

The Wi-microDig will then appear in the devices list with a green dot next to it to indicate that it is enabled. The blue LED on the Wi-microDig will also turn on to indicate that a Bluetooth connection has been made.

By default, Connect will not attempt to connect to your Wi-microDig when it is launched. If you would like to enable auto-connect, turn it on using the checkbox.

To remove the Wi-microDig from the device list (even when it's not connected and enabled), click on "Remove". You will then need to add it again when you next want to use it.