EditorX

EditorX is a desktop user interface for configuring standalone mode settings of a digitizer.

Sections

Setup

Options

Settings

Sensor Inputs

Sensor Input

Recording

MIDI Monitor

I-O Mapping

Actuator Outputs

Lookup Tables

OSC Output

Releases

7.3x configures USB-microDigs with firmware 7.3.

7.2x configures USB-microDigs with firmware 7.2 and Wi-microDigs with firmware 6.2.

7.1x configures all digitizers with firmware 4.1 - 6.1 or 7.1.

System Requirements

Release 7.3x

1. MacOS X 10.7 (Lion) or newer on Intel, or Windows 7 or newer
2. An I-CubeX digitizer:

• USB-microDig with firmware 7.3

1. USB port

   Virtual COM port driver

2. Connect software

   Virtual MIDI port driver (only needed on Windows)

Release 7.2x

1. MacOS X 10.7 (Lion) or newer on Intel, or Windows 7 or newer
2. An I-CubeX digitizer:

• Wi-microDig or USB-microDig with firmware 6.2 or 7.2

1. USB port or Bluetooth adapter

   Virtual COM port driver or Bluetooth driver including Serial Port Profile

2. Connect software

   Virtual MIDI port driver (only needed on Windows)

Release 7.1x

1. MacOS X 10.7 (Lion) or newer on Intel, or Windows 7 or newer
2. An I-CubeX digitizer:

• Wi-microDig, Wi-miniDig or USB-microDig with firmware 4.5 - 6.1 or 7.1

1. USB port or Bluetooth adapter

   Virtual COM port driver or Bluetooth driver including Serial Port Profile

2. Connect software

   Virtual MIDI port driver (only needed on Windows)

• Digitizer, miniDig or microDig with firmware 4.1 - 5.1

1. MIDI interface

   MIDI interface driver