If you need one with different sensing area dimensions, here are all the versions we have available:

• Slide-0050 (50 x 7.0 mm, 2.0 x 0.28 inch)
• Slide-0100 (100 x 7.0 mm, 3.94 x 0.28 inch)
• Slide-0150 (150 x 7.0 mm, 5.91 x 0.28 inch)
• Slide-0200 (200 x 7.0 mm, 7.87 x 0.28 inch)
• Slide-0300 (300 x 7.0 mm, 11.8 x 0.28 inch)
• Slide-0400 (400 x 7.0 mm, 15.7 x 0.28 inch)
• Slide-0500 (500 x 7.0 mm, 19.7 x 0.28 inch)
• Slide-0750 (750 x 7.0 mm, 29.5 x 0.28 inch)
• Slide-1000 (1000 x 7.0 mm, 39.4 x 0.28 inch)
• SlideRound (46-56 mm, 1.8-2.2 inch inner-outer diameter)
• And that's not all .. still more can be made available upon request: eg. Slide-0012, Slide-0025 (12.5/25 x 7.0 mm, 0.492/0.984 x 0.28 inch), as well as narrower (6.0 mm, 0.24 inch) versions of all straight Slide sensors and SlideRound sensor.

Application examples

1. Use as ribbon controller, perfect for your keyboard or DJ setup. Or check how Uwe Steger used the Slide.
2. May be used as a pitch controller to design your own fretless base. See this videoclip for a demo how a Slide-500 was combined with the TouchStrip to control eg. vibrato at the same time. Add TouchMinis for capturing slaps. A GForce3D will help you accentuate your tones when you move the stem upright.
3. Create a fancy control panel by combining Push sensors (Push, Push3D), Reach sensors (Reach, ReachClose), Slide sensors (see above), Touch sensors (Touch, TouchMicro-05 TouchMicro-10, TouchMini, TouchMiniOn, TouchStrip) and Turn sensors to name a few.

Technical specifications

Product			Slide-0200 sensor
Version			1.0 (November 2014)
Sensing parameter			single-axis contact position
Sensing method			resistive
Active area			200 x 7.0 mm (7.87 x 0.28 inch)
Range			200 mm (7.87 inch)
Linearity			3%
Output resistance			approx. ? kOhm (no force applied), ? to ? kOhm when moving from one end to the other
Calibration
mm		inch	Voltage (use 5 V power supply)	7-bit MIDI value (use 'no processing' editor preset)
no contact		no contact	0.00	0
0		0	0.00	0
200		7.87	5.00	127
Power supply			1.0 to 10 V DC, ? mA at 5 V
Dimensions			216 x 20.5 x 0.5 mm (8.50 x 0.807 x 0.02 inch)
Mounting			adhesive strip
Cable			1.0 m (39 inch), shielded, red wire = power, black wire = ground, white wire = sensor output, extendable at least 100 m (328 ft) with ExtendCableD-10
Connector			male 1x4 plug with a row of 3 pins spaced 2.54 mm (0.100 inch)
Weight			20 g (0.71 oz), incl. cable
Software support			Our SensePlay software is a very easy way to quickly map sensor data to (sequences of) sounds, images and videos using a drag & drop user interface. Our EditorX software allows you to configure the digitizer to process and map the sensor data of multiple sensors simultaneously. Our Link software allows you to receive the sensor data from the digitizer and use your computer to view, calibrate, record, process and map the sensor data of multiple sensors simultaneously. Our SensorX software allows you to receive the sensor data from the digitizer and use your computer to view, calibrate, record, process and map the data of a single sensor.
Application notes			Touching the sensor at both ends for an extended period of time creates a short-circuit that may result in damage to the sensor. When mounting the sensor with eg. clamps, make sure that there is no contact force on the sensitive areas at the ends. The sensor can be trimmed so that multiple units can be placed adjacently, forming a multi-touch area. Please note that modifying the sensor voids any warranty we may provide. The sensor can be stacked on top of another sensor that's rotated by an angle (eg. 90 degrees) in the same plane to create a two-dimensional touch controller. The sensor is operational while bent. Please note that since the sensor wasn't designed to be used in bent form, we can't provide durability information and guarantee the specifications. There is a limit to the bend angle, ie. if the sensor is bent too sharply the material will crease and possibly tear.