More blue than the SeeLaser-Red, this purple or violet laser has a touch of blacklight in it.
- Use as trigger beam together with Flash sensor. Laserharp anyone ? See this videoclip for a demo of the SeeLaser-Red applied together with the Flash sensor ! Create a virtual cage for dancers. Or detect intruder, visitor, dog, cat, mouse .... movements.
- Make every move count and add a TapTiled floor, some MoveOn and/or ReachClose sensors. You might need to rethink your choreography.
||1.0 (October 2015)|
||405 nm (purple light)|
||at least 20 m|
||5 mW (safety class IIIa)|
||5 V DC, 37 mA|
||12.5 mm (0.49 inch) diameter x 45 mm (1.8 inch) long|
||mount in 12.5 mm (0.49 inch) hole|
||1.0 m (39 inch), shielded, red wire = power, black wire = ground, white wire = n/c, extendable at least 100 m (328 ft) with ExtendCableD-10|
||male 1x4 plug with 3 pins in a row spaced 2.54 mm (0.100 inch)|
||15 g (0.53 oz), incl. cable|
- Our EditorX software allows you to configure the digitizer to control multiple actuators simultaneously with on/off as well as PWM signals.
- Our Link software allows you to multiple actuators simultaneously with on/off signals.
- Can be powered directly by the 5V power of any digitizer but if you want to control it with the USB-microDig actuator outputs (top row of the connector for sensors and actuators), it needs to be connected via a Switch.
- The size and intensity of the purple dot can be changed by adjusting the focus, which can be set by rotating the lens at the front using a screwdriver.
- Caution ! Never point the beam at the eye, stare into the beam nor look at the beam through a microscope or other lenses. Inform yourself about laser safety.