Application examples

1. Create a fancy control panel by combining Push sensors (Push, Push2D), Reach sensors (Reach, ReachClose), Slide sensors (eg. Slide-50, Slide-200, Slide-500, SlideRound, SlideWide), Touch sensors (Touch, TouchMicro-05, TouchMicro-10, TouchMini, TouchMiniOn, TouchStrip) and Turn sensors to name a few.

Technical specifications

Product		Push-100 sensor
Version		1.5 (July 2017)
Sensing parameter		contact position
Sensing method		linear resistive potentiometer
Range		100 mm (3.94 inch)
Output resistance		0 Ohm (at 0 mm and 100 mm) to 5 KOhm (at 50 mm)
Calibration
mm	inch	Voltage (use 5 V power supply)	7-bit MIDI value (use 'no processing' editor preset)
0.00	0	0.00	0
100	3.94	5.00	127
Power supply		1.0 to 10 V DC, 0.5 mA at 5 V
Dimensions		140 x 30 x 14 mm (5.4 x 1.2 x 0.55 inch), shaft: a 14.2 x 8.0 x 1.2 mm (0.559 x 0.31 x 0.047 inch), knob: 24 x 11 x 11 mm (0.98 x 0.43 x 0.43 inch)
Mounting		two 3.0 mm (0.12 inch) mounting holes spaced apart 12 cm (4.7 inch)
Cable		1.0 m (39 inch), shielded, red wire = power, black wire = ground, white wire = sensor output, extendable at least 100 m (328 ft) with ExtendCableD-10
Connector		male 1x4 plug with 3 pins in a row spaced 2.54 mm (0.100 inch)
Weight		35 g (1.2 oz), incl. cable
Software support		Our SensePlay software is a very easy way to quickly map sensor data to (sequences of) sounds, images and videos using a drag & drop user interface. Our EditorX software allows you to configure the digitizer to process and map the sensor data of multiple sensors simultaneously. Our Link software allows you to receive the sensor data from the digitizer and use your computer to view, calibrate, record, process and map the sensor data of multiple sensors simultaneously. Our SensorX software allows you to receive the sensor data from the digitizer and use your computer to view, calibrate, record, process and map the data of a single sensor.