Home About News New Customer My Account My Cart All products Download Support
Products Get Started
Demos Contact Us
Browse products
All products
My account
My quotes
My cart
Click here for upcoming events ..

AdaptCableKit v1.1 $6.71US
2 - 6 : $6.38US ( save 5% )
7 - 19 : $6.04US ( save 10% )
20 + : $5.37US ( save 20% )
excl. sales tax

Allows you to make an adapter cable, see a few examples in the pict below. Twist or braid the wires to minimize noise and RF interference. Compatible with HackPlugs. Comes with two pieces of heatshrink to secure the connectors together.

This cable kit can be used to connect actuators such as the SwitchPower to a Digitizer. It can also be used to connect a digital (I2C) sensor with a 2x4 plug to a USB-microDig running v7.3 or newer, which requires a 1x4 plug. Or use this kit to connect a digital (I2C) sensor with a 1x4 plug to a Wi-microDig running firmware v6.3 or older or a USB-microDig running v7.2 or older, which requires a 2x4 plug.

Technical specifications

Product AdaptCableKit
Version 1.1 (July 2021)
Cable 0.20 m (7.9 inch), unshielded
Weight 5 g (0.2 oz)
Connectors 1 2x4 housing, 2 1x4 housings, 5 wires each with a pin and a receptacle both in 1x1 housings, all spaced 2.54 mm (0.100 inch)
Application information
  • Twist or braid the wires to minimize noise and RF interference.
  • Remove the housings from the pin of the wire as needed to be able to insert it in a 1x4 or 2x4 housing. To do so take the pin out of the housing slot after slightly lifting the plastic lever with a pointy or sharp object and then push the pin in the other housing slot such that the lever clicks into place and the pin can't be pushed out.
  • Use one of the two heatshrink sections to secure the connectors together. Slide the heatshrink section over the female connector of the extension cable. Plug the male connector of the sensor into the female connector of the extension cable. Apply heat evenly to the heatshrink using a heatgun (a hairdryer will also work) to shrink the heatshrink section so that it tightly covers the two connectors (also see the picture on this page). The second heatshrink section is a spare for future use.
  • This page was updated on Saturday 16 July 2022.
    Comments by customers Write Review
    There are currently no comments on this product.
    Customers who bought this product also purchased
    BreakoutCableD-01 v1.0
    BreakoutCableD-01 v1.0
    Air-040 v1.0
    Air-040 v1.0
    SeeRed v2.3
    SeeRed v2.3
    MoveOn v1.8
    MoveOn v1.8
    AngleD v1.2
    AngleD v1.2
    EncloseSensor v1.0
    EncloseSensor v1.0
    Product Search

    Advanced Search
    Comments more
    Write ReviewWrite a comment on this product!
    New Customers

    Need help?



    User forums

    Linkedin group LinkedIn group

    Facebook page Facebook page