Home About News New Customer My Account My Cart All products Download Support
Products Get Started
Demos Contact Us
Shop
Browse products
All products
My account
My quotes
My cart
Login
Currency:
Events
Click here for upcoming events ..


Checkout
BioBeat3D v1.3 $35.87US
 
2 - 6 : $34.08US ( save 5% )
7 - 19 : $32.29US ( save 10% )
20 + : $28.70US ( save 20% )
excl. sales tax

Be I-CubeX-ed in a heartbeat. This sensor will capture your pulse simply by placing the sensor anywhere on your body where blood is flowing right below the skin surface, like your finger tip or earlobe. Doubles as a sensor for blood oxygen saturation (SpO2). Triples as a (skin) temperature sensor. A digital I2C sensor, that outputs calibrated, high resolution, low-noise signals. Comes with two velcro strips to secure the sensor to a finger tip.

Requires a WiDig, or USB-microDig running firmware v7.51 or higher. The WiDig or USB-microDig can only support one BioBeat3D.


Application information

Product BioBeat sensor
Examples The BioBeat3D combines perfectly with the BioEmo, and BioVolt. Become zen and still perform.
  1. Add intensity to your musical performance by tweaking your sound through signals straight from the heart.
  2. Perform heartbeat controlled audio with the BioBeat3D software (see below).
  3. For whole-body expression go bodysuit, capture all your joints' movements and express with all your extremities. Combine with BendMicro, BendMini and BendShort sensors from finger to toe. Add a GForce3D-6 on your feet and hands to capture kicks and punches. A Hot will keep you in check of your body temp. Top it all off with a TouchGlove on both hands to always be able to touch-control your performance, even when you're doing a handstand.
  4. For sleep research, combine with an Orient4D for body orientation, a HotSpot2D for respiration, a BioEmo for skin conductance, and a BioVolt for muscle contractions.
Manuals
  1. Make sure the sensor is plugged into the digitizer with the red wire connected to power. Reversing the plug may cause damage to the sensor.
  2. Requires a WiDig or USB-microDig running firmware v7.51 or higher.
  3. The WiDig or USB-microDig firmware can process the data of only one BioBeat3D.
  4. To mount the sensor on the finger, place the sensor on your finger tip and wrap the velcro strip around it to secure the sensor in place. Wrap the second velcro strip around the cable and another part of the finger, see picture below. The sensor can be placed anywhere on the body where blood is flowing right below the skin surface.
  5. If the sensor is pressed onto the skin too hard, or if the skin is whitish (eg. because it is too cold), there will be no signal variation that corresponds to the blood flow. If it is pressed onto the skin too lightly, the sensor may move relatively to the skin too easily resulting in too large signal variations. In either case no heartbeat can be detected.
  6. After the sensor is enabled, it takes a few seconds before the heartbeat is detected continuously and heartbeat rate and/or blood oxygen saturation are output. Skin temperature is output immediately after the sensor is enabled.
  7. The default I2C address is 87 (0x57). Both I2C lines have 10 kOhm pull-up resistors.
  8. See the BioBeat3D function description in the firmware documentation for more details about the various methods available in host and standalone mode.
  9. For more technical specs, and to find out how to access the sensor data in detail, please consult this datasheet.
  10. To extend the cable, use ExtendCableD-01 and/or ExtendCableD-10.
  11. For further reading we recommend studying about the photoplethysmogram and pulse oximetry.
Software
  • Our software enables you to use most features of this sensor. In EditorX, use the method parameter to set the sensor to output (method #0) heartbeat pulse, heartbeat rate, SpO2 and skin temperature, (method #2-124) heartbeat pulse, heartbeat rate, blood oxygen saturation and skin temperature as well as the raw sensor data in the form of reflected infra-red and red light intensity values (both scaled by the method number), (method #125) heartbeat pulse and heartbeat rate, (method #126) blood oxygen saturation or (method #127) temperature.

  • 16 Jul 2019: BioBeat3D v1.10 for MacOS and Windows from source code in Max. Requires a digitizer with firmware v7.51 or higher. For multiple sensors or sensor outputs, run multiple instances of the application, each started in its own folder. Use together with Connect (MacOS / Windows).
  • 22 Jan 2018: BioBeat3D v1.01 for MacOS and Windows from source code in Max. Requires a digitizer with firmware v7.51 or higher. For multiple sensors or sensor outputs, run multiple instances of the application, each started in its own folder. Use together with Connect (MacOS / Windows).



Technical specifications

Product BioBeat3D sensor
Version 1.3 (January 2023)
Sensing parameter skin blood perfusion level, blood oxygen saturation level, skin temperature
Sensing method IR and red LED light reflectance sensor
Infrared LED wavelength 870 to 900 nm, 880 nm (typical)
Red LED wavelength 650 to 670 nm, 660 nm (typical)
Photo detector spectral range 600 to 900 nm
Photo detector sampling rate 50/100/200/400/800/1000/1600/3200 (configurable), 100 Hz (firmware v7.5 default)
Heartbeat update rate 25 Hz (dependent on digitizer firmware, v7.5 default)
Heartbeat bandwidth 15 to 250 BPM (dependent on digitizer firmware, v7.5 default)
Heartbeat resolution 0.004 BPM (dependent on digitizer firmware, v7.5 default)
Blood oxygen saturation range 93 to 100 %
Blood oxygen saturation resolution 1 %
Temperature range -40 to 85 ºC
Temperature resolution 0.625 ºC
Temperature accuracy 1 ºC
Power supply 5 V DC, 2 mA at 5 V
Dimensions 14 x 14 x 5 mm (0.55 x 0.55 x 0.2 inch)
Mounting two 8.5 x 0.5 mm (0.33 x 0.02 inch) slits spaced apart 17 mm (0.70 inch), four 1 mm holes 12 mm spaced apart width-wise as well as length-wise and two 2 x 9 cm (0.8 x 3.5 inch) velcro straps
Cable 1.0 m (39 inch) shielded, red wire = power, black wire = ground, white wire = signal, extendable at least 20 m (66 ft) with ExtendCableD-10
Connector male 1x4 plug with a row of 4 pins spaced 2.54 mm (0.100 inch)
Weight 10 g (0.35 oz) incl. cable and straps

This page was updated on Tuesday 10 January 2023.
Comments by customers Write Review
There are currently no comments on this product.
Customers who bought this product also purchased
TapMatOn v1.0
TapMatOn v1.0
EncloseMini v1.0
EncloseMini v1.0
SeeWhite-3W v1.0
SeeWhite-3W v1.0
Drive-FR120N v1.0
Drive-FR120N v1.0
EncloseDig v1.0
EncloseDig v1.0
EncloseSensor v1.0
EncloseSensor v1.0
Product Search




Advanced Search
Comments more
Write ReviewWrite a comment on this product!
Support
New Customers

Need help?

Resources

Downloads

User forums

Linkedin group LinkedIn group

Facebook page Facebook page