Home About News New Customer My Account My Cart All products Download Support
Products Get Started
Demos Contact Us
Shop
Browse products
All products
My account
My quotes
My cart
Login
Currency:
Events
Click here for upcoming events ..


Checkout
DriveM v1.0 $21.15US
 
2 - 6 : $20.10US ( save 5% )
7 - 19 : $19.04US ( save 10% )
20 + : $16.92US ( save 20% )
excl. sales tax

A motor driver that enables you to control small 5V motors. A digital I2C actuator, that is highly configurable.

Application examples

  1. Create an interactive robot. Place two small motors with wheels, and a 3rd freely rotating wheel, on a chassis and use a WiDig with two DriveM actuators to control the motors. Add a ReachClose and map the signal to both motors and see it move as you approach it.

Technical specifications

Product DriveM actuator
Version 2.0 (September 2016)
Actuator type H-Bridge driver
Driving current 1 A (max)
Driving output connector screw terminal block with 2 terminals
Power supply 2.75 to 6.80 V DC, 2 mA (max) at 5 V without motor
Operating temperature -40 to 150 ºC (-40 to 302 ºF)
Dimensions 26 x 26 x 12 mm (1.0 x 1.0 x 0.47 inch)
Mounting three 3.0 mm (0.12 inch) mounting holes spaced apart 20 mm (0.79 inch)
Cable 1.0 m (39 inch), shielded, red wire = power, black wire = ground, grey wire = I2C data (SDA), white wire = I2C clock (SCL), extendable at least 50 m (164 ft) with ExtendCableD-10
Connector male 1x4 plug with 4 pins in a row spaced 2.54 mm (0.100 inch)
Weight 15 g (0.53 oz), incl. cable
Software support
  • Our EditorX software allows you to configure the digitizer to control multiple actuators simultaneously.

  • We will soon release dedicated software for using this actuator. Ask us about it !
Application notes
  1. Make sure the actuator is plugged into the digitizer with the red wire connected to power. Reversing the plug or applying power with reverse polarity may cause damage to the actuator.
  2. Requires a digitizer with digital (I2C) ports, eg. the WiDig, USB-microDig or the Wi-microDig.
  3. The default I2C address is 100 (0x64). Both I2C lines have 1 kOhm pull-up resistors.
  4. Our software enables you to use most features. For more technical specs, and to find out how to control the actuator in detail, please consult this datasheet.
  5. The current available to drive the motor is determined by the maximum current the digitizer can provide minus the current draw of other devices connected to the digitizer. To provide a larger current, pull the pin connected to the red wire from the housing by lifting its plastic lever and connect the pin (and ground) to an external 5V power supply. The DriveM is specified as capable of driving currents up to 1 A but a heatsink (for the chip on the bottom, no screw terminal, side of the board) may be required to prevent overheating.

This page was updated on Wednesday 10 August 2022.
Comments by customers Write Review
There are currently no comments on this product.
Product Search




Advanced Search
Comments more
Write ReviewWrite a comment on this product!
Support
New Customers

Need help?

Resources

Downloads

User forums

Linkedin group LinkedIn group

Facebook page Facebook page