Page 1 of 1

Standalone MIDI use?

Posted: Wed Aug 01, 2012 9:50 pm
by simulcast
Hi,
Apologies for the super basic question.
I wanted to know more about setting up an icubex midi system with a hardware synth.
Does the microsystem need to be set up with a computer and software first or can I simply plug the midi cable directly into a hardware synth and have sensor control?
Basically, I want to create a standalone installation using a hardware synth and sensors without a computer in the installation (it's OK if I need to set everything up with the software first, I just don't want the computer as part of the install).
Does the microsystem 'remember' the settings set up in the software?
Hope that made sense!
Cheers

Re: Standalone MIDI use?

Posted: Thu Aug 02, 2012 10:35 am
by Tech
Go to http://icubex.com/getstarted, and you should find all the answers there. More specifically, probably http://infusionsystems.com/catalog/info ... ges_id/208 or http://infusionsystems.com/catalog/info ... ges_id/215 will address your questions. And yes, the microsystem remembers it settings after having been setup with the editor software on a computer.