Standalone MIDI use?

Discussion of I-CubeX applications and use. Post here questions about your project, product suggestions, bugs, setup issues, ..

Moderator: Tech

Post Reply
simulcast
Posts: 1
Joined: Wed Dec 31, 1969 7:00 pm

Standalone MIDI use?

Post by simulcast »

Hi,
Apologies for the super basic question.
I wanted to know more about setting up an icubex midi system with a hardware synth.
Does the microsystem need to be set up with a computer and software first or can I simply plug the midi cable directly into a hardware synth and have sensor control?
Basically, I want to create a standalone installation using a hardware synth and sensors without a computer in the installation (it's OK if I need to set everything up with the software first, I just don't want the computer as part of the install).
Does the microsystem 'remember' the settings set up in the software?
Hope that made sense!
Cheers
Tech
Posts: 77
Joined: Tue Dec 31, 2002 7:00 pm

Re: Standalone MIDI use?

Post by Tech »

Go to http://icubex.com/getstarted, and you should find all the answers there. More specifically, probably http://infusionsystems.com/catalog/info ... ges_id/208 or http://infusionsystems.com/catalog/info ... ges_id/215 will address your questions. And yes, the microsystem remembers it settings after having been setup with the editor software on a computer.
I-CubeX Technical Support
Post Reply