hooking up flex sensor
Posted: Mon Mar 03, 2003 7:57 pm
I have a flex sensor with a resistance value between 10 and 40K Ohms. Two leads. How do I wire it to the Icube box?
I tried wiring it:
Power to first flex sensor lead. Second flex sensor lead to signal, signal to ground.
I got 127 and it didn't move. I assume it's because the resistance value is too high.
Elliot
I tried wiring it:
Power to first flex sensor lead. Second flex sensor lead to signal, signal to ground.
I got 127 and it didn't move. I assume it's because the resistance value is too high.
Elliot