Midi Pitch

Discussion of I-CubeX applications and use. Post here questions about your project, product suggestions, bugs, setup issues, ..

Moderator: Tech

Post Reply
Stephan Athanas
Posts: 1
Joined: Tue Dec 31, 2002 7:00 pm

Midi Pitch

Post by Stephan Athanas »

Hi,
Do you know if its possible to configure a sensor, that it gives out different Midi notes on, depending of the value of the sensor?
Thanks for help
Tech
Posts: 77
Joined: Tue Dec 31, 2002 7:00 pm

Midi Pitch

Post by Tech »

Hi,

The Stand Alone mode of the I-CubeX digitizer allows only for sending one MIDI event per input. So you can get only one MIDI note-on for a sensor. A way around this would be to feed the signal output from a sensor to multiple inputs on the digitizer (using many HackCable). You could then program the digitizer to send different MIDI note-on from different threshold levels from all the inputs that are connected to this single sensor.

Regards.

--
Technical Support
Infusion Systems Ltd.
Post Reply