Unable to connect digitizer to editor

Discussion of I-CubeX applications and use. Post here questions about your project, product suggestions, bugs, setup issues, ..

Moderator: Tech

Post Reply
RSMI
Posts: 1
Joined: Wed Dec 31, 1969 7:00 pm

Unable to connect digitizer to editor

Post by RSMI »

I recently received my I-Cubex system kit but I am unable to get the editor to connect to the digitizier. I connect the computer to the digitizer using the MidiSport-Uno interface. The first screen on the editor asks to choose an interface so I selected USB from the drop-down menu. I then attempted to test the connection by following the instruction in the manual for "Testing the I-CubeX environment". Nothing happened.
Notes:
-When the digitizer is powered up the Midi out light flashes twice.
-Midi Out & In cables are plugged into the digitizer, the indicator lights are off.
-The USB light on the MidiSport-Uno pulses on/off. The midi in & out lights are off.

Am I doing something wrong or missing a step?
Post Reply