Unable to connect digitizer to editor
Posted: Sun Sep 13, 2009 11:06 am
I recently received my I-Cubex system kit but I am unable to get the editor to connect to the digitizier. I connect the computer to the digitizer using the MidiSport-Uno interface. The first screen on the editor asks to choose an interface so I selected USB from the drop-down menu. I then attempted to test the connection by following the instruction in the manual for "Testing the I-CubeX environment". Nothing happened.
Notes:
-When the digitizer is powered up the Midi out light flashes twice.
-Midi Out & In cables are plugged into the digitizer, the indicator lights are off.
-The USB light on the MidiSport-Uno pulses on/off. The midi in & out lights are off.
Am I doing something wrong or missing a step?
Notes:
-When the digitizer is powered up the Midi out light flashes twice.
-Midi Out & In cables are plugged into the digitizer, the indicator lights are off.
-The USB light on the MidiSport-Uno pulses on/off. The midi in & out lights are off.
Am I doing something wrong or missing a step?