Search in forums does not work

Discussion of I-CubeX applications and use. Post here questions about your project, product suggestions, bugs, setup issues, ..

Moderator: Tech

Post Reply
mooncaine
Posts: 13
Joined: Thu Feb 22, 2007 7:51 pm

Search in forums does not work

Post by mooncaine »

Hi,

I just want to alert users and staff that this forum's search feature does not work reliably.

I searched for words that I know are here, but the search feature reports, for example, "No posts were found because the word push2d is not contained in any post."

So, if you're searching, and it tells you there are no results, don't give up, because search isn't working.
][][][][][][][
microDig, Turn v1.3.1, Touch v1.4.1, Slide v2.1, TouchMicro-10 v1.0, Push2D v2.0,
MacBook Pro
Tascam US-122 and PreSonus Firebox audi/midi interfaces
Tech
Posts: 77
Joined: Tue Dec 31, 2002 7:00 pm

Re: Search in forums does not work

Post by Tech »

Thanks a lot for letting us know of your failed search. Would you be able to give an example of a search that does not find what is actually present in the forum ?
I-CubeX Technical Support
mooncaine
Posts: 13
Joined: Thu Feb 22, 2007 7:51 pm

Re: Search in forums does not work

Post by mooncaine »

"slide" didn't turn up a search until I posted today's reply... then, it turns up results. Darn.

Working great now, though. Thanks!
][][][][][][][
microDig, Turn v1.3.1, Touch v1.4.1, Slide v2.1, TouchMicro-10 v1.0, Push2D v2.0,
MacBook Pro
Tascam US-122 and PreSonus Firebox audi/midi interfaces
Post Reply