|
|
| Line 6: |
Line 6: |
| | *[[EditorX_Sensor_Input_Processing | Processing]] | | *[[EditorX_Sensor_Input_Processing | Processing]] |
| | *[[EditorX_Sensor_input_MIDI_Message | MIDI Message]] | | *[[EditorX_Sensor_input_MIDI_Message | MIDI Message]] |
| − |
| |
| − | ==MIDI Message==
| |
| − |
| |
| − | The MIDI Message settings configure the digitizer to output MIDI messages with the sensor value. The following MIDI messages can be selected:
| |
| − |
| |
| − | *NoteOff
| |
| − | *NoteOn
| |
| − | *KeyPressure
| |
| − | *ControlChange
| |
| − | *ProgramChange
| |
| − | *AfterTouch
| |
| − | *PitchBend
| |
| − |
| |
| − | If the sensor input is configured to process values continuously as well as detect peaks or dips and their ending, the peak or dip and their ending are sent in the form of the MIDI message selected but additional MIDI key-pressure messages are sent to transmit the sensor value after the peak or dip is detected and until their end is detected.
| |
Revision as of 05:27, 1 November 2015
The Sensor Input section configures a single sensor input of the digitizer.
It contains the following sub-sections:
