Difference between revisions of "Firmware-811 Message-035"
(Copied from Firmware-810 Message-035, revision 3951) |
|||
| Line 1: | Line 1: | ||
==RESET ACK (35, 23h)== | ==RESET ACK (35, 23h)== | ||
| − | The RESET ACK message provides acknowledgement that the WiDig has been reset. A reset is performed when the WiDig is powered up and that COM port connection is established, or when a [[Firmware- | + | The RESET ACK message provides acknowledgement that the WiDig has been reset. A reset is performed when the WiDig is powered up and that COM port connection is established, or when a [[Firmware-811_Command-034 |RESET command]] is sent to it. If the WiDig is set to host mode and a RESET command is sent, the WiDig will send out the RESET ACK message once (visible as one blink of the OUT LED). If in stand-alone mode the RESET ACK message will be sent out twice with a 1s interval in between the two messages (visible as two blinks of the OUT LED). |
There is no [BODY] for the RESET ACK message. | There is no [BODY] for the RESET ACK message. | ||
Latest revision as of 16:20, 16 April 2019
RESET ACK (35, 23h)
The RESET ACK message provides acknowledgement that the WiDig has been reset. A reset is performed when the WiDig is powered up and that COM port connection is established, or when a RESET command is sent to it. If the WiDig is set to host mode and a RESET command is sent, the WiDig will send out the RESET ACK message once (visible as one blink of the OUT LED). If in stand-alone mode the RESET ACK message will be sent out twice with a 1s interval in between the two messages (visible as two blinks of the OUT LED).
There is no [BODY] for the RESET ACK message.
