Difference between revisions of "EditorX Sensor Input"

From I-CubeX Wiki
Jump to: navigation, search
 
(4 intermediate revisions by the same user not shown)
Line 1: Line 1:
The Sensor Input section configures a single sensor input of the digitizer.
+
The Sensor Input section configures a single sensor input of the digitizer. The sensor type can be selected as analog or digital, and the signal processing configuration can be visualized in a diagram.
  
It contains the following sub-sections:
+
[[File: sensor-input_analog-visualize.png]]
 +
 
 +
 
 +
The remainder of the Sensor Input section is explained in the following sub-sections:
  
 
*[[EditorX_Sensor_Input_Analog_Digital | Analog / Digital]]
 
*[[EditorX_Sensor_Input_Analog_Digital | Analog / Digital]]
 
*[[EditorX_Sensor_Input_Processing | Processing]]
 
*[[EditorX_Sensor_Input_Processing | Processing]]
*[[EditorX_Sensor_input_MIDI_Message | MIDI Message]]
+
*[[EditorX_Sensor_Input_Signal_Flow | Signal Flow]]
 
+
*[[EditorX_Sensor_Input_MIDI_Message | MIDI Message]]
==MIDI Message==
 
 
 
The MIDI Message settings configure the digitizer to output MIDI messages with the sensor value. The following MIDI messages can be selected:
 
 
 
*NoteOff
 
*NoteOn
 
*KeyPressure
 
*ControlChange
 
*ProgramChange
 
*AfterTouch
 
*PitchBend
 
 
 
If the sensor input is configured to process values continuously as well as detect peaks or dips and their ending, the peak or dip and their ending are sent in the form of the MIDI message selected but additional MIDI key-pressure messages are sent to transmit the sensor value after the peak or dip is detected and until their end is detected.
 

Latest revision as of 22:11, 9 November 2015

The Sensor Input section configures a single sensor input of the digitizer. The sensor type can be selected as analog or digital, and the signal processing configuration can be visualized in a diagram.

Sensor-input analog-visualize.png


The remainder of the Sensor Input section is explained in the following sub-sections: