Difference between revisions of "Firmware-73 Message-035"
(Created page with "==RESET ACK (35, 23h)== The RESET ACK message provides acknowledgement that the USB-microDig has been reset. A reset is performed when the USB-microDig is powered up and that...") |
|||
| Line 1: | Line 1: | ||
==RESET ACK (35, 23h)== | ==RESET ACK (35, 23h)== | ||
| − | The RESET ACK message provides acknowledgement that the USB-microDig has been reset. A reset is performed when the USB-microDig is powered up and that COM port connection is established, or when a RESET command is sent to it. If the USB-microDig is set to host mode and a RESET command is sent, the USB-microDig will send out the RESET ACK message once (visible as one blink of the OUT LED). If in stand-alone mode the RESET ACK message will be sent out twice with a 1s interval in between the two messages (visible as two blinks of the OUT LED). | + | The RESET ACK message provides acknowledgement that the USB-microDig has been reset. A reset is performed when the USB-microDig is powered up and that COM port connection is established, or when a [[Firmware-73_Command-034 |RESET command]] is sent to it. If the USB-microDig is set to host mode and a RESET command is sent, the USB-microDig will send out the RESET ACK message once (visible as one blink of the OUT LED). If in stand-alone mode the RESET ACK message will be sent out twice with a 1s interval in between the two messages (visible as two blinks of the OUT LED). |
There is no [BODY] for the RESET ACK message. | There is no [BODY] for the RESET ACK message. | ||
Latest revision as of 05:04, 12 November 2016
RESET ACK (35, 23h)
The RESET ACK message provides acknowledgement that the USB-microDig has been reset. A reset is performed when the USB-microDig is powered up and that COM port connection is established, or when a RESET command is sent to it. If the USB-microDig is set to host mode and a RESET command is sent, the USB-microDig will send out the RESET ACK message once (visible as one blink of the OUT LED). If in stand-alone mode the RESET ACK message will be sent out twice with a 1s interval in between the two messages (visible as two blinks of the OUT LED).
There is no [BODY] for the RESET ACK message.
