Difference between revisions of "EditorX-71x Actuator Outputs"
(Created page with "==MIDI== The MIDI user interface configures the actuator outputs to respond to MIDI messages sent to the digitizer. The Port menu lists the available MIDI ports. The Message...") |
(No difference)
|
Revision as of 14:56, 1 November 2015
MIDI
The MIDI user interface configures the actuator outputs to respond to MIDI messages sent to the digitizer. The Port menu lists the available MIDI ports. The Message menu lists the available MIDI messages (NoteOff, NoteOn, KeyPressure, ControlChange). The Control or Note field sets the control or note number for actuator output 1. The Thresh/Max value sets the threshold above which an actuator output is triggered or toggled (depending on the mode of the actuator output), or, if the actuator output is pulse width modulated, it sets the maximum value of the MIDI message to be used for setting the pulse width. In the latter case the pulse width is scaled between the minimum pulse width and the pulse width represented by Max, and the response is inverted if the actuator output is in toggle mode.
