Difference between revisions of "Firmware-751 Command-004"
(Copied from Firmware-75 Command-004, revision 1932) |
|||
| Line 1: | Line 1: | ||
==SAMPLE (4, 04h)== | ==SAMPLE (4, 04h)== | ||
| − | The SAMPLE command provides a single snapshot of the data sampled from one port or all ports, whether configured for an analog sensor or a digital (I2C) sensor. Upon completion of the command the USB-microDig sends out the [[Firmware- | + | The SAMPLE command provides a single snapshot of the data sampled from one port or all ports, whether configured for an analog sensor or a digital (I2C) sensor. Upon completion of the command the USB-microDig sends out the [[Firmware-751_Message-004 |SAMPLE DATA message]], whether in host or stand-alone mode. |
The [BODY] of the SAMPLE command is composed of one byte - the sensor input number: | The [BODY] of the SAMPLE command is composed of one byte - the sensor input number: | ||
Latest revision as of 03:20, 11 January 2018
SAMPLE (4, 04h)
The SAMPLE command provides a single snapshot of the data sampled from one port or all ports, whether configured for an analog sensor or a digital (I2C) sensor. Upon completion of the command the USB-microDig sends out the SAMPLE DATA message, whether in host or stand-alone mode.
The [BODY] of the SAMPLE command is composed of one byte - the sensor input number:
| 0000xyyy: | x = 1; apply the command to all ports (yyy is ignored), ie. send 8 messages with the sensor data for each port |
| yyy = [0..7]; ports, where the first port number = 0, and the last (8th) port number = 7 |
Example:
In order to sample port 5, the following message is sent:
- 240, 125, 0 {DEV}, 4 {SAMPLE}, 4 {yyy}, 247 (F0h, 7Dh, 00h, 04h, 04h, F7h)
