Difference between revisions of "Firmware-820 Command-091"
(Created page with "==DUMP MODE (91, 5Bh)== This command requests the WiDig to send out its current mode of operation, which may be different from the mode setting stored in non-volatile memory....") |
(No difference)
|
Latest revision as of 23:41, 6 March 2022
DUMP MODE (91, 5Bh)
This command requests the WiDig to send out its current mode of operation, which may be different from the mode setting stored in non-volatile memory. The WiDig can function in host mode (for example when using it with the iCube plugin for Max/MSP), or stand-alone mode (otherwise). See the SET MODE command for more information on the mode of operation. Upon completion of the command the WiDig sends out the MODE message.
There is no [BODY] for the DUMP MODE command.
