Difference between revisions of "Firmware-770 Command-111"
(Created page with "==LOW POWER AND COM (111, 6Fh)== This command sets the USB-microDig to dim the LEDs and report its serial port status. Upon completion of the command the USB-microDig sends o...") |
(No difference)
|
Revision as of 00:44, 7 March 2022
LOW POWER AND COM (111, 6Fh)
This command sets the USB-microDig to dim the LEDs and report its serial port status. Upon completion of the command the USB-microDig sends out the LOW POWER AND COM message. To get the LED and serial port status, send the command without body.
To set the LEDs, the [BODY] of the LOW POWER command should be as follows:
| 0xxxxxxx: | xxxxxxx = 64; turn LEDs on |
| xxxxxxx = 96; dim LEDs |
