Difference between revisions of "Firmware-830 Command-013"
(Copied from Firmware-820 Command-013, revision 5787) |
(No difference)
|
Latest revision as of 00:12, 7 March 2022
DUMP INTERVAL (13, 0Dh)
The DUMP INTERVAL command can be used to retrieve the sampling interval of the sampling loop in the WiDig. The command can be used in both host and stand-alone modes of operation. Upon completion of the DUMP INTERVAL command the WiDig sends out the same message as the INTERVAL command.
The DUMP INTERVAL command has no [BODY].
Example:
- 240, 125, 0 {DEV}, 13 {DUMP INTERVAL}, 247 (F0h, 7Dh, 00h, 0Dh, F7h)
