Difference between revisions of "Firmware-73 Message-035"
(Created page with "==RESET ACK (35, 23h)== The RESET ACK message provides acknowledgement that the USB-microDig has been reset. A reset is performed when the USB-microDig is powered up and that...") |
(No difference)
|
Revision as of 04:39, 12 November 2016
RESET ACK (35, 23h)
The RESET ACK message provides acknowledgement that the USB-microDig has been reset. A reset is performed when the USB-microDig is powered up and that COM port connection is established, or when a RESET command is sent to it. If the USB-microDig is set to host mode and a RESET command is sent, the USB-microDig will send out the RESET ACK message once (visible as one blink of the OUT LED). If in stand-alone mode the RESET ACK message will be sent out twice with a 1s interval in between the two messages (visible as two blinks of the OUT LED).
There is no [BODY] for the RESET ACK message.
