Firmware-810 Command-032

From I-CubeX Wiki
Revision as of 02:11, 11 December 2018 by Admin (talk | contribs)
Jump to: navigation, search

SET SOLO (32, 20h)

The SET SOLO command stops the processing of all sensor inputs except one so that the user can easily utilise the MIDI learn capability of a MIDI device. It is only effective in stand-alone mode. After completion of the SET SOLO command, the WiDig does not send out any MIDI messages representing sensor values except for one input. After a RESET, all active sensors are processed.

The [BODY] associated with this command:


Example:

240, 125, 0 {DEV}, 32 {TOGGLE MUTE}, 64, 247 (F0h, 7Dh, 00h, 20h, 40h, F7h)
Retrieved from "https://infusionsystems.com/support/wiki/index.php?title=Firmware-810_Command-032&oldid=4028"