Connect-150 Firmware Upload

From I-CubeX Wiki
Revision as of 06:58, 12 January 2018 by Admin (talk | contribs) (Created page with "The firmware upload utility allows you to upload the latest firmware to your digitizer. Clicking the "Check Firmware" button on the digitizer view will check whether a new fir...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

The firmware upload utility allows you to upload the latest firmware to your digitizer. Clicking the "Check Firmware" button on the digitizer view will check whether a new firmware version is available for the connected digitizer. Follow the instructions shown in the digitizer view to complete the upload.

By clicking the "Check Firmware" button while holding down the option button, you can select a specific firmware file to be uploaded so that it's possible to downgrade or upload custom versions (available upon request).


Connect-150 digitizer view firmware upload.png


For Wi-microDigs, you will be asked to press and hold a button while powering it up. This button is located right next to the blue LED. It is a little hard to to press (so as to avoid setting the digitizer accidentally into firmware upload mode).


Connect-150 digitizer view firmware upload wmd button.jpg

Retrieved from "https://infusionsystems.com/support/wiki/index.php?title=Connect-150_Firmware_Upload&oldid=2473"