EditorX Sensor Input MIDI Message

From I-CubeX Wiki
Revision as of 05:28, 1 November 2015 by Admin (talk | contribs) (Created page with "The MIDI Message subsection configures the sensor input to output MIDI messages that contain the sensor value. The following MIDI messages can be selected: *NoteOff *NoteOn...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

The MIDI Message subsection configures the sensor input to output MIDI messages that contain the sensor value.

The following MIDI messages can be selected:

  • NoteOff
  • NoteOn
  • KeyPressure
  • ControlChange
  • ProgramChange
  • AfterTouch
  • PitchBend

If the sensor input is configured to process values continuously as well as detect peaks or dips and their ending, the peak or dip and their ending are sent in the form of the MIDI message selected but additional MIDI key-pressure messages are sent to transmit the sensor value after the peak or dip is detected and until their end is detected.

Retrieved from "https://infusionsystems.com/support/wiki/index.php?title=EditorX_Sensor_Input_MIDI_Message&oldid=148"