Firmware-75 Command-092

From I-CubeX Wiki
Revision as of 21:04, 4 October 2017 by Admin (talk | contribs) (Created page with "==SET ID (92, 5Ch)== The SET ID command sets the system exclusive device ID of the USB-microDig, enabling use of up to 128 USB-microDigs in one MIDI chain. The SET ID command...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

SET ID (92, 5Ch)

The SET ID command sets the system exclusive device ID of the USB-microDig, enabling use of up to 128 USB-microDigs in one MIDI chain. The SET ID command can be sent with any device ID in the header of the system exclusive message, ie. the device ID will be set to the new value regardless of the current device ID of the USB-microDig receiving the SET ID command. The default value is 0. Upon completion of the command the USB-microDig sends out the same command.

The [BODY] of the SET ID command:

0xxxxxxx: xxxxxxx = [0..127]; new system exclusive device ID
Retrieved from "https://infusionsystems.com/support/wiki/index.php?title=Firmware-75_Command-092&oldid=1914"