Firmware-75 Command-095

From I-CubeX Wiki
Revision as of 21:07, 4 October 2017 by Admin (talk | contribs) (Created page with "==DUMP MIDI STATUS (95, 5Fh)== This command requests the USB-microDig to send out whether running status, active sensing and sampling loop marking are enabled or not. See the...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

DUMP MIDI STATUS (95, 5Fh)

This command requests the USB-microDig to send out whether running status, active sensing and sampling loop marking are enabled or not. See the MIDI STATUS command for more information. Upon completion of the command the USB-microDig sends out the MIDI STATUS message.

There is no [BODY] for the DUMP MIDI STATUS command.

Retrieved from "https://infusionsystems.com/support/wiki/index.php?title=Firmware-75_Command-095&oldid=1921"