Firmware-75 Command-030

From I-CubeX Wiki
Revision as of 21:15, 4 October 2017 by Admin (talk | contribs) (Created page with "==DUMP TABLE ENTRY (30, 1Eh)== The DUMP TABLE ENTRY command retrieves a lookup table entry stored in non-volatile memory. The command can be used in both host and stand-alone...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

DUMP TABLE ENTRY (30, 1Eh)

The DUMP TABLE ENTRY command retrieves a lookup table entry stored in non-volatile memory. The command can be used in both host and stand-alone modes of operation. Upon completion of the DUMP TABLE ENTRY command the USB-microDig sends out the same message as the TABLE ENTRY command. This command is not available for digitizers with hardware v7.0 or lower.

The [BODY] of the DUMP TABLE ENTRY command:

000nnnnn: nnnnn = [0..31]; table number
00000ddd: ddd = [0..7]; table entry index MSB
0ddddddd: ddddddd = [0..127]; table entry index LSB
Retrieved from "https://infusionsystems.com/support/wiki/index.php?title=Firmware-75_Command-030&oldid=1938"