EditorX Options

From I-CubeX Wiki
Revision as of 14:29, 31 October 2015 by Admin (talk | contribs) (Created page with "The Options section sets the sample interval, mode of operation and muting. The sample interval can be set between a minimum and a maximum value, in milliseconds. The minimum...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

The Options section sets the sample interval, mode of operation and muting.

The sample interval can be set between a minimum and a maximum value, in milliseconds. The minimum value is 1 ms for all digitizers except the Digitizer, which has a 4 ms minimum. The maximum value is 16383 ms, ie. about 16 seconds.

The mode of operation can be set as standalone or host. EditorX sets a digitizer to standalone mode immediately after establishing a connection with a digitizer since EditorX can only configure the standalone mode settings of a digitizer.

Muting can be set to on or off, and configures the digitizer to stop sampling of all sensor inputs so that no data is output by the digitizer.

Retrieved from "https://infusionsystems.com/support/wiki/index.php?title=EditorX_Options&oldid=31"