Firmware-800 Message-095
Revision as of 23:10, 28 May 2018 by Admin (talk | contribs) (Copied from Firmware-80 Message-095, revision 3012)
MIDI STATUS (95, 60h)
This message contains the activation status of the WiDig running status, active sensing and sampling loop marking. See the MIDI STATUS command for more information.
The [BODY] of the MIDI STATUS message is as follows:
| 00000zyx: | x = 0; MIDI running status enabled (channel voice MIDI messages only include a MIDI status byte when it changes) | |
| x = 1; MIDI running status disabled (each channel voice MIDI message includes a MIDI status byte) | ||
| y = 0; MIDI active sensing disabled | ||
| y = 1; MIDI active sensing enabled | ||
| z = 0; Sampling interval marking disabled | ||
| z = 1; Sampling interval marking enabled |
